Close this search box.

Regulatory Compliance: Navigating Tire Safety Standards for Commercial Fleets

Share This:
Tire Safety Standards for Commercial Fleets

In 2021, Commercial Vehicle Safety Alliance (CVSA) examined over 40,000 commercial trucks over three days in May for its annual International Roadcheck. Inspectors removed over 6,700 trucks for having out-of-service violations. Tire issues, including compliance with Tire Safety Standards for Commercial Fleets, were cited as the second most common violation during road inspections, with brakes coming in at number one. The CVSA conducts these Roadchecks to identify prevalent issues with commercial trucks on the road. Maintaining tires to regulatory standards isn’t just good practice to avoid fees or fines; it’s also a crucial safety and financial matter. Understanding and adhering to safety standards for commercial tires ensures compliance and enhances road safety for everyone.

Who Sets Tire Standards?

The Department of Transportation sets tire safety standards for commercial fleets. However, it’s the Federal Motor Carrier Safety Administration (FMCSA) and the CVSA that actively enforce these crucial regulations. Violations of Tire Safety Standards for Commercial Fleets, as issued by the CVSA, are treated with utmost seriousness. When a truck receives such a violation, it is immediately placed out-of-service until the issue is appropriately resolved. This means the truck cannot be driven back to the service center and must either be towed or have a mechanic dispatched to address the problem.

DOT Tire Tread Regulations and Compliance with Tire Safety Standards for Commercial Fleets

It can be difficult to know if a tire is safe or not, just by looking at it. Tread depth is a key indicator of tire health, and it is a key compliance concern. DOT regulations specify:

  • Steer tires must have a minimum of 4/32-inch of tread depth.
  • Trailer tires must have a minimum of 2/32-inch tread depth.

In addition, trucks will be taken out of service if the tires have any of these problems:

  • Tread or sidewall separation
  • Has an audible leak or is flat
  • Exposed ply or belt material

Tires must be properly inflated for the tire’s specifications. The size of the load and tire capacity must be appropriate for the vehicle. Using tires that don’t meet those specifications can cause a truck to get a violation notice or citation for out-of-service.

Why Are DOT Regulations So Important?

Worn out tires, improperly installed tires, and improperly inflated tires are all critical factors that directly impact tire safety, in alignment with Tire Safety Standards for Commercial Fleets. Such tires have a higher risk of experiencing blowouts on the road, which can result in accidents, injuries, and even fatalities. It’s essential to recognize that even if tires appear to be in good condition, they may not be safe for use until they are thoroughly examined and approved by a professional, ensuring compliance with tire safety standards for commercial fleets.

How To Maintain Tires at DOT Standards and Tire Safety Standards for Commercial Fleets

Commercial tires should be inspected regularly. At the least, check tread tire pressure weekly as part of a pre-trip inspection. At the beginning of the day, tires should be visually inspected for condition issues, such as flats, bulges, bumps, and sidewall damage. Look for uneven wear because that indicates a problem with the truck.

Trust STTC for Commercial Tire Management

STTC’s tire experts have decades of experience in keeping tires compliant with DOT regulations. We offer retreading services and tire asset management for fleets of all sizes, to maximize your tire dollars.

Give us a call now at 610-954-8473 or contact us online to learn more about how we help you take care of your commercial tires.

You may also like...

More from other categories